Lightning Car Charger -
Foldable Stand -
Multi-Sync Keyboard -
USB 3.0 4-Port Hub
USB 3.0 Gigabit Ethernet
Lightning to USB Cable
Micro USB ClipOn Cable -
Micro HDMI Cable
iAdapt HDMI - 10FT
iAdapt VGA - 10FT
iAdapt DVI - 10FT
MHL 2.0 Adapter
See All Products
Works with MacBook, iMac and Mac mini
If you are using an existing Mac with Mini DisplayPort or looking to upgrade to the latest MacBook Pro, we have you covered. Connect Kanex iAdapt DVI from your Mac* with Mini DisplayPort or Thunderbolt port to a standard analog monitor, projector, or LCD that uses a VGA connector
*Click on the specs tab above for details.
Mini DisplayPort to DVI
The iAdapt DVI converts a Mini DisplayPort signal into a DVI signal so you can connect your Mac to a DVI display or projector. Make use of the widely available DVI equipped devices with your Mac.
Improve your Performance
Extend or mirror your desktop onto a secondary display to advance your workspace. Increase your productivity and multi tasking at work and at home with an extended workspace.
Use the iAdapt DVI for your presentations whether at school or work. Show presentations from any display or projector that utilizes DVI with this simple plug and play adapter. The portable design makes it easy to carry on the go.
Mini Display Port
Supports up to 2.25Gbps per channel
Maximum resolution of 1920 x 1080p @60Hz
2 inches (L) x 1.6 inches (W) x 0.6 inches (H)
4.64 out of 5/ Based on
I bought this adapter to hook up my new Wacom graphics tablet to my MacBook Pro. I love this adapter! It works perfectly to connect these two machines… no sputters or loss of data, no screen flickers as reported with adapters even made by Apple… It Is Perfect!
Reviewed by MA, Schuylkill Haven PA United States, 1/26/2014
Device: Macbook Pro - Year: 2014/January
I use this to connect a Macbook Pro to a Wacom 21UX Cintiq drawing tablet. I originally used a connector that I bought at the Apple store. From time to time my Cintiq screen image would wobble or get slow-moving waves in it. I thought there was some error in the driver software, or perhaps the Cintiq itself was falling apart. Then I saw a post from someone experiencing a similar problem, who had discovered that the connector was at fault. I searched and found Kanex, bought the product and have had no problems since. It is an excellent connector, far superior to the one that Apple themselves supply. My only dislike is that the brand name is not printed on the connector itself anywhere, and when I wanted to buy a spare I couldn't remember the name of the company, and had to search until I recognized the logo.
Reviewed by SW, Sherman Oaks CA United States, 6/18/2013
Device: Macbook Pro - Year: 13/6
Hello, I returned it because it was the opposite of what I needed for my old Mac studio display monitor to work with new Mac Mini. The gentleman I emailed with correctly identified what I did need, based on photos I sent... I found it on ebay, as Kanex doesn't make/carry it. Thank you.
Reviewed by FN, Yonkers NY United States, 4/29/2013
Device: Others - Year: Macrh 2013
Works as expected, when it works.... It worked fine at the first time I connected my digital-only LCD monitor via this product. At some point later, OS went to sleep mode and so did the monitor. When OS wakes up, the monitor does not. During several subsequent attempts to get the image to the monitor, the monitor presence was detected perhaps 40% of the time. Never after sleep mode. Eventually I turned the sleep off in the monitor and turned it on/off manually. This worked for 2 days, then again no image to the monitor. Now I don't even try anymore.
Reviewed by PL, New Orleans LA United States, 3/2/2013
Device: Mac Mini - Year: 2009
1. To drive a Wacom Cintiq from a MacBook Pro 2. Ease of use, portability 3. Not applicable 4. None
Reviewed by MC, Hoboken NJ United States, 3/2/2013
Device: Macbook Pro - Year: 2011
Connect mac pro to wacom cintiq drawinv tablet
Reviewed by SW, Sherman Oaks CA United States, 12/17/2012
Device: Others - Year:
Worked great-- used to connect an Apple Mini to a WacomUX21 tablet
Reviewed by MV, Chappaqua NY United States, 7/17/2012
Device: Mac Mini - Year: 2012
1. To connect my iMac to my Wacom tablet. 2. Easy and simple and efficient. 3. nothing 4. I appreciate that the packaging mentioned "gift" and a value of $5, so I did not have to pay any other taxes. I found it a bit expensive, the packaging and delivering ant it took a bit of time. I can say that i am very satisfied with the product and it deserves a 5 stars. Thank you! Sorry for moy English.
Reviewed by SP, Montreal QC Canada, 6/25/2012
Device: iMac - Year: 2009/07
I used this to connect my Macbook Pro to a Wacom Cintiq 18sx drawing tablet/screen. It works perfectly, the connection is strong and secure. I guess it'd be nice if the cord was a few inches longer, but it's a standard adapter length so I have no complaints on that.
Reviewed by CM, Beverly MA United States, 5/13/2012
Device: Macbook Pro - Year: 2011 (march)
1) This is used to connect an older monitor to a Mac Pro Tower that only has one VGI output and two thunderbolt outputs. 2) It seems pretty sturdy. 3) none - Too early to say. I only used it for a couple weeks. 4) Way over packaged for something as trivial as an adapter. Granted, certainly it is good quality, but it is a waste of paper and plastic.
Reviewed by PP, Tampa FL United States, 2/17/2012
Device: Mac Pro - Year: 2/12
1. I use this to Connect my MacBook Pro to an 18' Cintiq SX 2. Ease of use- just plug it in 3. I don't think its your product, but my Cintiq loses its calibration data when in sleep mode, meaning that the monitor either has to be turned off and on, or use a mouse to drive to the calibration controls. Mildly annoying, but not a deal-breaker. 4. This product was recommended by Wacom, and I appreciated the recommendation!
Reviewed by MC, Hoboken NJ United States, 12/12/2011
Device: Macbook Pro - Year: 4/2012
Share with your friends:
In The News
© 2014 Kanex. All Rights Reserved.
Connect with us
Get Kanex product updates in your inbox!