Foldable Stand -
Multi-Sync Keyboard -
USB 3.0 4-Port Hub
USB 3.0 Gigabit Ethernet
Lightning to USB Cable -
Micro USB ClipOn Cable -
SlimPort™ Adapter -
Micro HDMI Cable
iAdapt HDMI - 10FT
iAdapt VGA - 10FT
iAdapt DVI - 10FT
MHL 2.0 Adapter -
See All Products
The Kanex USB 3 to Gigabit Ethernet Adapter adds a Gigabit Ethernet port to your MacBook Air, MacBook Pro with Retina display or any other USB 3 enabled computer. Ideal for hotel rooms or conference rooms with a wired internet connection, this small and compact adapter connects to a USB 3 port on your computer and provides an RJ-45 port for connection to the internet or local area network for sharing and accessing files at data transfer rates of up to 1 Gbps.
Quick and Easy
Set-up is easy. After a one-time software installation, simply connect an Ethernet cable to the Kanex USB 3 to Gigabit Adapter then plug into the USB 3 port of your MacBook Air or MacBook Pro with Retina display. Now you’re connected to the network or the Internet!
Perfect for business or travel where Wi-Fi is limited such as hotels or conference rooms. This compact adapter is ready to go when you are. The Kanex USB 3 to Gigabit Adapter is bus powered through USB, therefore no external power is required.
This versatile little adapter is backwards compatible with USB 2.0 and USB 1.1 and can connect to both Mac and PC.
Kanex USB 3 to Gigabit Adapter
Compatible with USB 3.0/ USB 2.0/ USB 1.1 specifications
Requires driver installation
1.98in (w) x 5.17in (H) x 1.17in (L)
50.26mm x 131.26mm x 29.76mm
This 4-Port USB 3 Hub is fully compatible with USB 2.0 and USB 1.1 Device
The Hub must be plugged into a USB 3 port on the Mac or PC in order to achieve USB 3 SuperSpeed Rates
Where could I get the drivers that are needed for the ethernet to work?
The drivers are available under the downloads tab of the products page. (http://www.kanexlive.com/usb3lan)
For the latest news and offers, sign up for the Kanex newsletter
3.00 out of 5/ Based on
Hi, Unfortunately the product did not work with the device I was hoping to use it with. I have a number of Acer W510 and W710 Tablets as well as a few Lenovo Tablets which have USB3 ports that I need to image. I have successfully imaged them using usb2.0 10/100 adaptors but was wanting a usb3 Gig connection to reduce the imaging time from 3hrs to 45min using Microsoft SCCM. However the bios of these tablets do not natively recognise your device. I will keep trying and any advice would be greatly appreciated Thanks Vaughan
Reviewed by VP, Eltham North Victoria Australia, 8/13/2013
Device: Others - Year: 2013/6
Share with your friends:
MHL 2.0 Adapter
© 2013 Kanex. All Rights Reserved.
Connect with us
Get Kanex product updates in your inbox!
Vote Now! Pick the next